Roll forming machine with presser punching in Australia ceiling design, decorative panel
Application:
This production line has been designed to produce metal wall or sandwich panels with PU or Polyurethane insulated and various decoration patterns embossed, engraved or printed on the metal face.
This profile is widely used all around the world.
Quick Detail:
- Thickness : 0.8-1.2mm
- Material : G350 PPGI
- Input width : 680mm
- Effective width: 599mm
- Material weight : 3Tons
- Coil inner diameter : 480mm
- Driven way: by 5.5Kw driven motor
- Cutting way: after cut-off, there is waste
- Cutting tolerance : ±1mm
Machine list:
- Hydraulic Un-coiler with pre-leveling device
- Hydraulic punching or presser to be provided by the buyer
- Roll forming machine
- Hydraulic cutting device
- Run out rack
- PLC control system
Description/Technical Parameter details of complete line:
- Hydraulic Un-coiler with pre-leveling device
Hydraulic system to expand coil inner hole, four palms
Motorized driving coil rotation, auto stop/start control, 3KW
Load capacity=3Ton
Coil width: 700mm
Coil Inner-diameter: Φ510±30mm
Coil Outer-diameter Max. Φ1200mm
Snabber arm driven by pneumatic cylinder
Pre-straighten device with 7 shafts, four over three
Solid shaft Φ60, made from GCr15, hart chrome-coated
Four pneumatic cylinders to press the sheet
Max. line speed: 15mpm
Air source to be provided by the buyer
- Roll forming machine details as below table :
| Suitable roll forming material | Color steel sheet or galvanized steel sheet |
| Thickness | 0.8-1.2mm |
| Coil input width | 680mm |
| Carriage Frame design | Wall-plate-frame-design |
| Roll forming stages | 16 stages |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 5.5w with reducer |
| Rolling speed of roll former | 15m/min |
| Hydraulic group power | 4.0 Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 220V/60Hz/3PH or as requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
Stop to cut, Post cut, Slug Breaker
Cutting tool material: Cr12, Heat treatment
Total one set of cutting blades
Hydraulic power pack, Pump motor =4KW
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, rolled type, 4 meter long
Profile Drawing/Layout/Equipment reference pictures:
Product Tags:
|
|
High Precision Stud And Track Roll Forming Machine With Presser Punching Images
|
